And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:21.197
And
I configure APT to prefer an old version of cowsay
0.016
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.329
And
I accept adding "cowsay" to Additional Software
4.999
And
Additional Software is correctly configured for package "cowsay"
0.641
And
I shutdown Tails and wait for the computer to power off
4.096
And
I start Tails from USB drive "__internal" with network unplugged
39.851
And
I enable persistence
7.188
And
I configure APT to prefer an old version of cowsay
0.015
And
I disable the tails-virt-notify-user.service user unit
0.061
And
I log in to a new session
10.288
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.211
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.047
And
I prepare the Additional Software upgrade process to fail
0.072
And
the network is plugged
0.019
And
available upgrades have been checked
0.087
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.537
And
I can open the Additional Software configuration window from the notification
2.603
And
I shutdown Tails and wait for the computer to power off
23.305
And
I start Tails from USB drive "__internal" with network unplugged
40.633
And
I enable persistence
6.900
And
I configure APT to prefer an old version of cowsay
0.010
And
I log in to a new session
11.679
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.238
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.054
And
the network is plugged
0.027
Then
the Additional Software upgrade service has started
0.047
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.062