And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:20.938
And
I configure APT to prefer an old version of cowsay
0.010
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.766
And
I accept adding "cowsay" to Additional Software
4.958
And
Additional Software is correctly configured for package "cowsay"
0.824
And
I shutdown Tails and wait for the computer to power off
8.356
And
I start Tails from USB drive "__internal" with network unplugged
39.470
And
I enable persistence
6.647
And
I configure APT to prefer an old version of cowsay
0.012
And
I disable the tails-virt-notify-user.service user unit
0.077
And
I log in to a new session
10.613
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.201
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.044
And
I prepare the Additional Software upgrade process to fail
0.048
And
the network is plugged
0.020
And
available upgrades have been checked
2.167
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.609
And
I can open the Additional Software configuration window from the notification
2.534
And
I shutdown Tails and wait for the computer to power off
17.423
And
I start Tails from USB drive "__internal" with network unplugged
37.728
And
I enable persistence
5.587
And
I configure APT to prefer an old version of cowsay
0.011
And
I log in to a new session
12.229
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.218
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.048
And
the network is plugged
0.017
Then
the Additional Software upgrade service has started
0.081
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.058