And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:18.111
And
I configure APT to prefer an old version of cowsay
0.011
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.000
And
I accept adding "cowsay" to Additional Software
4.928
And
Additional Software is correctly configured for package "cowsay"
0.692
And
I shutdown Tails and wait for the computer to power off
8.519
And
I start Tails from USB drive "__internal" with network unplugged
38.910
And
I enable persistence
6.427
And
I configure APT to prefer an old version of cowsay
0.012
And
I disable the tails-virt-notify-user.service user unit
0.092
And
I log in to a new session
10.508
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.239
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.035
And
I prepare the Additional Software upgrade process to fail
0.048
And
the network is plugged
0.025
And
available upgrades have been checked
1.108
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.557
And
I can open the Additional Software configuration window from the notification
2.557
And
I shutdown Tails and wait for the computer to power off
17.356
And
I start Tails from USB drive "__internal" with network unplugged
37.334
And
I enable persistence
5.494
And
I configure APT to prefer an old version of cowsay
0.015
And
I log in to a new session
11.024
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.204
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.060
And
the network is plugged
0.024
Then
the Additional Software upgrade service has started
0.060
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.060