And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:14.643
And
I configure APT to prefer an old version of cowsay
0.017
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.419
And
I accept adding "cowsay" to Additional Software
3.771
And
Additional Software is correctly configured for package "cowsay"
0.662
And
I shutdown Tails and wait for the computer to power off
7.856
And
I start Tails from USB drive "__internal" with network unplugged
35.129
And
I enable persistence
6.290
And
I configure APT to prefer an old version of cowsay
0.011
And
I disable the tails-virt-notify-user.service user unit
0.053
And
I log in to a new session
9.907
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.194
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.042
And
I prepare the Additional Software upgrade process to fail
0.046
And
the network is plugged
0.016
And
available upgrades have been checked
2.200
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.540
And
I can open the Additional Software configuration window from the notification
2.576
And
I shutdown Tails and wait for the computer to power off
17.253
And
I start Tails from USB drive "__internal" with network unplugged
36.848
And
I enable persistence
6.580
And
I configure APT to prefer an old version of cowsay
0.010
And
I log in to a new session
10.127
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.220
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.046
And
the network is plugged
0.019
Then
the Additional Software upgrade service has started
0.066
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.062