And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:17.836
And
I configure APT to prefer an old version of cowsay
0.013
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.381
And
I accept adding "cowsay" to Additional Software
4.880
And
Additional Software is correctly configured for package "cowsay"
0.601
And
I shutdown Tails and wait for the computer to power off
8.726
And
I start Tails from USB drive "__internal" with network unplugged
38.334
And
I enable persistence
6.691
And
I configure APT to prefer an old version of cowsay
0.011
And
I disable the tails-virt-notify-user.service user unit
0.088
And
I log in to a new session
11.502
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.238
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.048
And
I prepare the Additional Software upgrade process to fail
0.046
And
the network is plugged
0.017
And
available upgrades have been checked
1.157
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.979
And
I can open the Additional Software configuration window from the notification
2.520
And
I shutdown Tails and wait for the computer to power off
22.584
And
I start Tails from USB drive "__internal" with network unplugged
37.418
And
I enable persistence
5.588
And
I configure APT to prefer an old version of cowsay
0.017
And
I log in to a new session
10.877
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.223
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.042
And
the network is plugged
0.020
Then
the Additional Software upgrade service has started
0.059
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.060