And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:20.080
And
I configure APT to prefer an old version of cowsay
0.015
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.457
And
I accept adding "cowsay" to Additional Software
4.913
And
Additional Software is correctly configured for package "cowsay"
0.775
And
I shutdown Tails and wait for the computer to power off
4.057
And
I start Tails from USB drive "__internal" with network unplugged
37.560
And
I enable persistence
6.526
And
I configure APT to prefer an old version of cowsay
0.011
And
I disable the tails-virt-notify-user.service user unit
0.058
And
I log in to a new session
11.041
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.471
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.042
And
I prepare the Additional Software upgrade process to fail
0.046
And
the network is plugged
0.015
And
available upgrades have been checked
2.158
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.410
And
I can open the Additional Software configuration window from the notification
2.590
And
I shutdown Tails and wait for the computer to power off
17.536
And
I start Tails from USB drive "__internal" with network unplugged
38.496
And
I enable persistence
5.786
And
I configure APT to prefer an old version of cowsay
0.013
And
I log in to a new session
11.076
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.226
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.048
And
the network is plugged
0.022
Then
the Additional Software upgrade service has started
0.054
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.075