And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:19.905
And
I configure APT to prefer an old version of cowsay
0.011
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.439
And
I accept adding "cowsay" to Additional Software
4.907
And
Additional Software is correctly configured for package "cowsay"
0.704
And
I shutdown Tails and wait for the computer to power off
8.250
And
I start Tails from USB drive "__internal" with network unplugged
38.333
And
I enable persistence
6.690
And
I configure APT to prefer an old version of cowsay
0.018
And
I disable the tails-virt-notify-user.service user unit
0.101
And
I log in to a new session
10.812
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.206
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.047
And
I prepare the Additional Software upgrade process to fail
0.055
And
the network is plugged
0.017
And
available upgrades have been checked
2.182
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.677
And
I can open the Additional Software configuration window from the notification
2.628
And
I shutdown Tails and wait for the computer to power off
14.020
And
I start Tails from USB drive "__internal" with network unplugged
38.276
And
I enable persistence
5.653
And
I configure APT to prefer an old version of cowsay
0.011
And
I log in to a new session
10.540
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.195
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.042
And
the network is plugged
0.021
Then
the Additional Software upgrade service has started
0.053
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.066