And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:54.354
And
I configure APT to prefer an old version of cowsay
0.010
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.193
And
I accept adding "cowsay" to Additional Software
4.957
And
Additional Software is correctly configured for package "cowsay"
0.555
And
I shutdown Tails and wait for the computer to power off
8.389
And
I start Tails from USB drive "__internal" with network unplugged
39.484
And
I enable persistence
7.006
And
I configure APT to prefer an old version of cowsay
0.010
And
I disable the tails-virt-notify-user.service user unit
0.051
And
I log in to a new session
10.616
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.270
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.055
And
I prepare the Additional Software upgrade process to fail
0.052
And
the network is plugged
0.015
And
available upgrades have been checked
1.125
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.563
And
I can open the Additional Software configuration window from the notification
2.612
And
I shutdown Tails and wait for the computer to power off
17.177
And
I start Tails from USB drive "__internal" with network unplugged
40.522
And
I enable persistence
7.183
And
I configure APT to prefer an old version of cowsay
0.012
And
I log in to a new session
14.046
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.185
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.042
And
the network is plugged
0.023
Then
the Additional Software upgrade service has started
0.057
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.072