And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:16.036
And
I configure APT to prefer an old version of cowsay
0.013
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.691
And
I accept adding "cowsay" to Additional Software
3.816
And
Additional Software is correctly configured for package "cowsay"
0.642
And
I shutdown Tails and wait for the computer to power off
8.048
And
I start Tails from USB drive "__internal" with network unplugged
36.297
And
I enable persistence
6.530
And
I configure APT to prefer an old version of cowsay
0.010
And
I disable the tails-virt-notify-user.service user unit
0.057
And
I log in to a new session
10.151
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.236
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.044
And
I prepare the Additional Software upgrade process to fail
0.049
And
the network is plugged
0.016
And
available upgrades have been checked
2.152
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.466
And
I can open the Additional Software configuration window from the notification
2.596
And
I shutdown Tails and wait for the computer to power off
13.589
And
I start Tails from USB drive "__internal" with network unplugged
36.758
And
I enable persistence
6.729
And
I configure APT to prefer an old version of cowsay
0.011
And
I log in to a new session
10.362
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.225
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.045
And
the network is plugged
0.023
Then
the Additional Software upgrade service has started
0.052
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.060