And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:23.709
And
I configure APT to prefer an old version of cowsay
0.015
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.768
And
I accept adding "cowsay" to Additional Software
4.971
And
Additional Software is correctly configured for package "cowsay"
0.624
And
I shutdown Tails and wait for the computer to power off
4.348
And
I start Tails from USB drive "__internal" with network unplugged
37.770
And
I enable persistence
6.943
And
I configure APT to prefer an old version of cowsay
0.011
And
I disable the tails-virt-notify-user.service user unit
0.058
And
I log in to a new session
10.082
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.217
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.042
And
I prepare the Additional Software upgrade process to fail
0.113
And
the network is plugged
0.047
And
available upgrades have been checked
2.175
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.276
And
I can open the Additional Software configuration window from the notification
2.585
And
I shutdown Tails and wait for the computer to power off
12.345
And
I start Tails from USB drive "__internal" with network unplugged
40.932
And
I enable persistence
8.420
And
I configure APT to prefer an old version of cowsay
0.025
And
I log in to a new session
10.834
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.542
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.032
And
the network is plugged
0.022
Then
the Additional Software upgrade service has started
0.096
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.062