And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:19.051
And
I configure APT to prefer an old version of cowsay
0.011
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.876
And
I accept adding "cowsay" to Additional Software
3.913
And
Additional Software is correctly configured for package "cowsay"
0.605
And
I shutdown Tails and wait for the computer to power off
8.170
And
I start Tails from USB drive "__internal" with network unplugged
37.806
And
I enable persistence
5.552
And
I configure APT to prefer an old version of cowsay
0.011
And
I disable the tails-virt-notify-user.service user unit
0.080
And
I log in to a new session
10.312
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.206
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.038
And
I prepare the Additional Software upgrade process to fail
0.072
And
the network is plugged
0.015
And
available upgrades have been checked
1.142
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.469
And
I can open the Additional Software configuration window from the notification
2.562
And
I shutdown Tails and wait for the computer to power off
13.601
And
I start Tails from USB drive "__internal" with network unplugged
37.862
And
I enable persistence
6.839
And
I configure APT to prefer an old version of cowsay
0.011
And
I log in to a new session
11.074
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.197
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.036
And
the network is plugged
0.018
Then
the Additional Software upgrade service has started
0.050
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.057