And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:21.906
And
I configure APT to prefer an old version of cowsay
0.028
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.399
And
I accept adding "cowsay" to Additional Software
4.791
And
Additional Software is correctly configured for package "cowsay"
0.814
And
I shutdown Tails and wait for the computer to power off
8.537
And
I start Tails from USB drive "__internal" with network unplugged
38.373
And
I enable persistence
7.740
And
I configure APT to prefer an old version of cowsay
0.022
And
I disable the tails-virt-notify-user.service user unit
0.060
And
I log in to a new session
10.599
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.220
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.057
And
I prepare the Additional Software upgrade process to fail
0.052
And
the network is plugged
0.019
And
available upgrades have been checked
1.154
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.602
And
I can open the Additional Software configuration window from the notification
2.578
And
I shutdown Tails and wait for the computer to power off
18.014
And
I start Tails from USB drive "__internal" with network unplugged
39.832
And
I enable persistence
6.959
And
I configure APT to prefer an old version of cowsay
0.010
And
I log in to a new session
12.752
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.249
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.053
And
the network is plugged
0.019
Then
the Additional Software upgrade service has started
0.063
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.057