And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:21.503
And
I configure APT to prefer an old version of cowsay
0.014
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.036
And
I accept adding "cowsay" to Additional Software
4.983
And
Additional Software is correctly configured for package "cowsay"
0.810
And
I shutdown Tails and wait for the computer to power off
8.108
And
I start Tails from USB drive "__internal" with network unplugged
38.117
And
I enable persistence
6.063
And
I configure APT to prefer an old version of cowsay
0.015
And
I disable the tails-virt-notify-user.service user unit
0.085
And
I log in to a new session
11.645
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.646
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.035
And
I prepare the Additional Software upgrade process to fail
0.084
And
the network is plugged
0.015
And
available upgrades have been checked
1.114
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.064
And
I can open the Additional Software configuration window from the notification
2.955
And
I shutdown Tails and wait for the computer to power off
4.299
And
I start Tails from USB drive "__internal" with network unplugged
37.980
And
I enable persistence
6.793
And
I configure APT to prefer an old version of cowsay
0.012
And
I log in to a new session
10.571
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.234
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.064
And
the network is plugged
0.021
Then
the Additional Software upgrade service has started
0.066
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.063