And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:16.024
And
I configure APT to prefer an old version of cowsay
0.030
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.172
And
I accept adding "cowsay" to Additional Software
3.839
And
Additional Software is correctly configured for package "cowsay"
0.669
And
I shutdown Tails and wait for the computer to power off
8.130
And
I start Tails from USB drive "__internal" with network unplugged
37.305
And
I enable persistence
6.325
And
I configure APT to prefer an old version of cowsay
0.011
And
I disable the tails-virt-notify-user.service user unit
0.063
And
I log in to a new session
9.897
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.193
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.041
And
I prepare the Additional Software upgrade process to fail
0.061
And
the network is plugged
0.020
And
available upgrades have been checked
1.142
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.010
And
I can open the Additional Software configuration window from the notification
2.545
And
I shutdown Tails and wait for the computer to power off
17.390
And
I start Tails from USB drive "__internal" with network unplugged
38.248
And
I enable persistence
6.299
And
I configure APT to prefer an old version of cowsay
0.012
And
I log in to a new session
9.531
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.164
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.048
And
the network is plugged
0.016
Then
the Additional Software upgrade service has started
0.059
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.063