And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:44.454
And
I configure APT to prefer an old version of cowsay
0.010
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.615
And
I accept adding "cowsay" to Additional Software
3.675
And
Additional Software is correctly configured for package "cowsay"
0.678
And
I shutdown Tails and wait for the computer to power off
4.279
And
I start Tails from USB drive "__internal" with network unplugged
36.480
And
I enable persistence
5.521
And
I configure APT to prefer an old version of cowsay
0.010
And
I disable the tails-virt-notify-user.service user unit
0.046
And
I log in to a new session
9.024
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.210
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.034
And
I prepare the Additional Software upgrade process to fail
0.052
And
the network is plugged
0.016
And
available upgrades have been checked
0.039
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.497
And
I can open the Additional Software configuration window from the notification
2.516
And
I shutdown Tails and wait for the computer to power off
18.504
And
I start Tails from USB drive "__internal" with network unplugged
35.687
And
I enable persistence
5.306
And
I configure APT to prefer an old version of cowsay
0.009
And
I log in to a new session
9.792
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.234
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.035
And
the network is plugged
0.016
Then
the Additional Software upgrade service has started
0.043
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.069