And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:21.043
And
I configure APT to prefer an old version of cowsay
0.011
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.998
And
I accept adding "cowsay" to Additional Software
4.810
And
Additional Software is correctly configured for package "cowsay"
0.745
And
I shutdown Tails and wait for the computer to power off
8.132
And
I start Tails from USB drive "__internal" with network unplugged
39.447
And
I enable persistence
7.053
And
I configure APT to prefer an old version of cowsay
0.012
And
I disable the tails-virt-notify-user.service user unit
0.067
And
I log in to a new session
10.486
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.218
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.069
And
I prepare the Additional Software upgrade process to fail
0.072
And
the network is plugged
0.014
And
available upgrades have been checked
1.122
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.063
And
I can open the Additional Software configuration window from the notification
2.772
And
I shutdown Tails and wait for the computer to power off
23.190
And
I start Tails from USB drive "__internal" with network unplugged
38.843
And
I enable persistence
6.805
And
I configure APT to prefer an old version of cowsay
0.012
And
I log in to a new session
10.757
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.278
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.039
And
the network is plugged
0.013
Then
the Additional Software upgrade service has started
0.080
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.068