And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:19.946
And
I configure APT to prefer an old version of cowsay
0.012
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.579
And
I accept adding "cowsay" to Additional Software
5.343
And
Additional Software is correctly configured for package "cowsay"
0.752
And
I shutdown Tails and wait for the computer to power off
8.077
And
I start Tails from USB drive "__internal" with network unplugged
38.372
And
I enable persistence
6.734
And
I configure APT to prefer an old version of cowsay
0.011
And
I disable the tails-virt-notify-user.service user unit
0.059
And
I log in to a new session
10.201
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.634
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.043
And
I prepare the Additional Software upgrade process to fail
0.073
And
the network is plugged
0.040
And
available upgrades have been checked
2.150
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.577
And
I can open the Additional Software configuration window from the notification
2.613
And
I shutdown Tails and wait for the computer to power off
17.520
And
I start Tails from USB drive "__internal" with network unplugged
38.365
And
I enable persistence
7.131
And
I configure APT to prefer an old version of cowsay
0.015
And
I log in to a new session
10.080
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.228
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.049
And
the network is plugged
0.030
Then
the Additional Software upgrade service has started
0.047
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.056