And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:20.506
And
I configure APT to prefer an old version of cowsay
0.014
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.221
And
I accept adding "cowsay" to Additional Software
5.278
And
Additional Software is correctly configured for package "cowsay"
0.623
And
I shutdown Tails and wait for the computer to power off
8.201
And
I start Tails from USB drive "__internal" with network unplugged
38.468
And
I enable persistence
6.415
And
I configure APT to prefer an old version of cowsay
0.009
And
I disable the tails-virt-notify-user.service user unit
0.061
And
I log in to a new session
10.256
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.259
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.034
And
I prepare the Additional Software upgrade process to fail
0.050
And
the network is plugged
0.014
And
available upgrades have been checked
1.129
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.973
And
I can open the Additional Software configuration window from the notification
2.577
And
I shutdown Tails and wait for the computer to power off
22.579
And
I start Tails from USB drive "__internal" with network unplugged
39.177
And
I enable persistence
6.889
And
I configure APT to prefer an old version of cowsay
0.014
And
I log in to a new session
11.815
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.228
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.046
And
the network is plugged
0.017
Then
the Additional Software upgrade service has started
0.061
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.056