And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:15.887
And
I configure APT to prefer an old version of cowsay
0.012
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.281
And
I accept adding "cowsay" to Additional Software
5.096
And
Additional Software is correctly configured for package "cowsay"
0.667
And
I shutdown Tails and wait for the computer to power off
7.904
And
I start Tails from USB drive "__internal" with network unplugged
36.717
And
I enable persistence
5.479
And
I configure APT to prefer an old version of cowsay
0.013
And
I disable the tails-virt-notify-user.service user unit
0.052
And
I log in to a new session
10.262
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.212
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.048
And
I prepare the Additional Software upgrade process to fail
0.043
And
the network is plugged
0.013
And
available upgrades have been checked
1.103
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.465
And
I can open the Additional Software configuration window from the notification
2.532
And
I shutdown Tails and wait for the computer to power off
17.392
And
I start Tails from USB drive "__internal" with network unplugged
36.931
And
I enable persistence
5.658
And
I configure APT to prefer an old version of cowsay
0.013
And
I log in to a new session
10.271
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.219
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.048
And
the network is plugged
0.015
Then
the Additional Software upgrade service has started
0.062
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.066