And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:14.822
And
I configure APT to prefer an old version of cowsay
0.011
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.299
And
I accept adding "cowsay" to Additional Software
3.659
And
Additional Software is correctly configured for package "cowsay"
0.641
And
I shutdown Tails and wait for the computer to power off
3.918
And
I start Tails from USB drive "__internal" with network unplugged
35.771
And
I enable persistence
5.613
And
I configure APT to prefer an old version of cowsay
0.012
And
I disable the tails-virt-notify-user.service user unit
0.064
And
I log in to a new session
9.973
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.185
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.037
And
I prepare the Additional Software upgrade process to fail
0.042
And
the network is plugged
0.014
And
available upgrades have been checked
2.161
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.513
And
I can open the Additional Software configuration window from the notification
2.578
And
I shutdown Tails and wait for the computer to power off
17.132
And
I start Tails from USB drive "__internal" with network unplugged
36.603
And
I enable persistence
5.390
And
I configure APT to prefer an old version of cowsay
0.012
And
I log in to a new session
10.019
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.204
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.029
And
the network is plugged
0.019
Then
the Additional Software upgrade service has started
0.062
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.075