And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:17.832
And
I configure APT to prefer an old version of cowsay
0.012
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.601
And
I accept adding "cowsay" to Additional Software
3.792
And
Additional Software is correctly configured for package "cowsay"
0.607
And
I shutdown Tails and wait for the computer to power off
4.574
And
I start Tails from USB drive "__internal" with network unplugged
37.972
And
I enable persistence
7.170
And
I configure APT to prefer an old version of cowsay
0.012
And
I disable the tails-virt-notify-user.service user unit
0.080
And
I log in to a new session
10.506
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.232
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.044
And
I prepare the Additional Software upgrade process to fail
0.046
And
the network is plugged
0.016
And
available upgrades have been checked
2.167
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.546
And
I can open the Additional Software configuration window from the notification
2.605
And
I shutdown Tails and wait for the computer to power off
17.740
And
I start Tails from USB drive "__internal" with network unplugged
36.999
And
I enable persistence
6.828
And
I configure APT to prefer an old version of cowsay
0.012
And
I log in to a new session
10.526
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.218
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.047
And
the network is plugged
0.022
Then
the Additional Software upgrade service has started
0.066
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.080