And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:19.006
And
I configure APT to prefer an old version of cowsay
0.013
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.973
And
I accept adding "cowsay" to Additional Software
5.312
And
Additional Software is correctly configured for package "cowsay"
0.686
And
I shutdown Tails and wait for the computer to power off
4.071
And
I start Tails from USB drive "__internal" with network unplugged
36.999
And
I enable persistence
6.756
And
I configure APT to prefer an old version of cowsay
0.013
And
I disable the tails-virt-notify-user.service user unit
0.063
And
I log in to a new session
11.350
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.210
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.050
And
I prepare the Additional Software upgrade process to fail
0.066
And
the network is plugged
0.021
And
available upgrades have been checked
1.098
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.988
And
I can open the Additional Software configuration window from the notification
2.561
And
I shutdown Tails and wait for the computer to power off
17.359
And
I start Tails from USB drive "__internal" with network unplugged
38.322
And
I enable persistence
6.688
And
I configure APT to prefer an old version of cowsay
0.012
And
I log in to a new session
12.047
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.571
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.047
And
the network is plugged
0.016
Then
the Additional Software upgrade service has started
0.055
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.071