And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:11.404
And
I configure APT to prefer an old version of cowsay
0.011
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.342
And
I accept adding "cowsay" to Additional Software
3.623
And
Additional Software is correctly configured for package "cowsay"
0.613
And
I shutdown Tails and wait for the computer to power off
4.179
And
I start Tails from USB drive "__internal" with network unplugged
36.119
And
I enable persistence
6.354
And
I configure APT to prefer an old version of cowsay
0.012
And
I disable the tails-virt-notify-user.service user unit
0.047
And
I log in to a new session
10.277
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.182
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.038
And
I prepare the Additional Software upgrade process to fail
0.052
And
the network is plugged
0.014
And
available upgrades have been checked
2.160
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.535
And
I can open the Additional Software configuration window from the notification
2.539
And
I shutdown Tails and wait for the computer to power off
17.005
And
I start Tails from USB drive "__internal" with network unplugged
35.664
And
I enable persistence
6.523
And
I configure APT to prefer an old version of cowsay
0.010
And
I log in to a new session
9.998
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.441
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.033
And
the network is plugged
0.019
Then
the Additional Software upgrade service has started
0.052
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.060