And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:20.800
And
I configure APT to prefer an old version of cowsay
0.011
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.607
And
I accept adding "cowsay" to Additional Software
3.687
And
Additional Software is correctly configured for package "cowsay"
0.731
And
I shutdown Tails and wait for the computer to power off
8.361
And
I start Tails from USB drive "__internal" with network unplugged
39.245
And
I enable persistence
6.325
And
I configure APT to prefer an old version of cowsay
0.013
And
I disable the tails-virt-notify-user.service user unit
0.098
And
I log in to a new session
10.743
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.512
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.048
And
I prepare the Additional Software upgrade process to fail
0.051
And
the network is plugged
0.016
And
available upgrades have been checked
2.159
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.510
And
I can open the Additional Software configuration window from the notification
2.560
And
I shutdown Tails and wait for the computer to power off
4.171
And
I start Tails from USB drive "__internal" with network unplugged
39.075
And
I enable persistence
7.378
And
I configure APT to prefer an old version of cowsay
0.023
And
I log in to a new session
10.660
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.217
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.049
And
the network is plugged
0.022
Then
the Additional Software upgrade service has started
0.041
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.070