And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:17.925
And
I configure APT to prefer an old version of cowsay
0.010
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.938
And
I accept adding "cowsay" to Additional Software
3.834
And
Additional Software is correctly configured for package "cowsay"
0.756
And
I shutdown Tails and wait for the computer to power off
3.999
And
I start Tails from USB drive "__internal" with network unplugged
36.964
And
I enable persistence
5.556
And
I configure APT to prefer an old version of cowsay
0.010
And
I disable the tails-virt-notify-user.service user unit
0.088
And
I log in to a new session
10.089
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.246
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.035
And
I prepare the Additional Software upgrade process to fail
0.046
And
the network is plugged
0.014
And
available upgrades have been checked
2.236
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.467
And
I can open the Additional Software configuration window from the notification
2.518
And
I shutdown Tails and wait for the computer to power off
22.923
And
I start Tails from USB drive "__internal" with network unplugged
37.760
And
I enable persistence
5.697
And
I configure APT to prefer an old version of cowsay
0.023
And
I log in to a new session
11.640
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.162
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.044
And
the network is plugged
0.018
Then
the Additional Software upgrade service has started
0.120
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.108