And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:23.190
And
I configure APT to prefer an old version of cowsay
0.015
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.017
And
I accept adding "cowsay" to Additional Software
6.156
And
Additional Software is correctly configured for package "cowsay"
0.657
And
I shutdown Tails and wait for the computer to power off
4.179
And
I start Tails from USB drive "__internal" with network unplugged
38.989
And
I enable persistence
9.344
And
I configure APT to prefer an old version of cowsay
0.011
And
I disable the tails-virt-notify-user.service user unit
0.060
And
I log in to a new session
10.995
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.289
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.057
And
I prepare the Additional Software upgrade process to fail
0.053
And
the network is plugged
0.091
And
available upgrades have been checked
2.258
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.156
And
I can open the Additional Software configuration window from the notification
2.576
And
I shutdown Tails and wait for the computer to power off
17.756
And
I start Tails from USB drive "__internal" with network unplugged
38.561
And
I enable persistence
6.883
And
I configure APT to prefer an old version of cowsay
0.010
And
I log in to a new session
10.887
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.563
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.041
And
the network is plugged
0.018
Then
the Additional Software upgrade service has started
0.059
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.060