And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:18.991
And
I configure APT to prefer an old version of cowsay
0.028
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.575
And
I accept adding "cowsay" to Additional Software
3.689
And
Additional Software is correctly configured for package "cowsay"
0.695
And
I shutdown Tails and wait for the computer to power off
7.179
And
I start Tails from USB drive "__internal" with network unplugged
37.350
And
I enable persistence
6.526
And
I configure APT to prefer an old version of cowsay
0.012
And
I disable the tails-virt-notify-user.service user unit
0.054
And
I log in to a new session
10.564
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.252
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.029
And
I prepare the Additional Software upgrade process to fail
0.051
And
the network is plugged
0.019
And
available upgrades have been checked
2.143
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.578
And
I can open the Additional Software configuration window from the notification
2.565
And
I shutdown Tails and wait for the computer to power off
23.011
And
I start Tails from USB drive "__internal" with network unplugged
37.427
And
I enable persistence
6.205
And
I configure APT to prefer an old version of cowsay
0.010
And
I log in to a new session
11.177
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.353
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.037
And
the network is plugged
0.042
Then
the Additional Software upgrade service has started
0.066
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.058