And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:13.535
And
I configure APT to prefer an old version of cowsay
0.036
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.311
And
I accept adding "cowsay" to Additional Software
3.651
And
Additional Software is correctly configured for package "cowsay"
0.567
And
I shutdown Tails and wait for the computer to power off
4.008
And
I start Tails from USB drive "__internal" with network unplugged
36.838
And
I enable persistence
6.604
And
I configure APT to prefer an old version of cowsay
0.010
And
I disable the tails-virt-notify-user.service user unit
0.053
And
I log in to a new session
9.290
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.263
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.034
And
I prepare the Additional Software upgrade process to fail
0.055
And
the network is plugged
0.015
And
available upgrades have been checked
3.205
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.459
And
I can open the Additional Software configuration window from the notification
2.575
And
I shutdown Tails and wait for the computer to power off
12.975
And
I start Tails from USB drive "__internal" with network unplugged
35.077
And
I enable persistence
5.457
And
I configure APT to prefer an old version of cowsay
0.013
And
I log in to a new session
9.952
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.193
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.042
And
the network is plugged
0.020
Then
the Additional Software upgrade service has started
0.043
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.063