And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:15.088
And
I configure APT to prefer an old version of cowsay
0.014
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.477
And
I accept adding "cowsay" to Additional Software
3.639
And
Additional Software is correctly configured for package "cowsay"
0.664
And
I shutdown Tails and wait for the computer to power off
4.039
And
I start Tails from USB drive "__internal" with network unplugged
37.419
And
I enable persistence
5.780
And
I configure APT to prefer an old version of cowsay
0.011
And
I disable the tails-virt-notify-user.service user unit
0.059
And
I log in to a new session
9.283
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.195
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.035
And
I prepare the Additional Software upgrade process to fail
0.042
And
the network is plugged
0.021
And
available upgrades have been checked
1.111
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.559
And
I can open the Additional Software configuration window from the notification
2.566
And
I shutdown Tails and wait for the computer to power off
13.064
And
I start Tails from USB drive "__internal" with network unplugged
35.753
And
I enable persistence
6.250
And
I configure APT to prefer an old version of cowsay
0.022
And
I log in to a new session
10.023
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.355
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.045
And
the network is plugged
0.023
Then
the Additional Software upgrade service has started
0.041
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.065