And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:25.090
And
I configure APT to prefer an old version of cowsay
0.013
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.679
And
I accept adding "cowsay" to Additional Software
3.746
And
Additional Software is correctly configured for package "cowsay"
0.660
And
I shutdown Tails and wait for the computer to power off
8.688
And
I start Tails from USB drive "__internal" with network unplugged
40.393
And
I enable persistence
7.719
And
I configure APT to prefer an old version of cowsay
0.012
And
I disable the tails-virt-notify-user.service user unit
0.060
And
I log in to a new session
10.445
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.253
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.050
And
I prepare the Additional Software upgrade process to fail
0.048
And
the network is plugged
0.017
And
available upgrades have been checked
0.054
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.422
And
I can open the Additional Software configuration window from the notification
2.605
And
I shutdown Tails and wait for the computer to power off
22.090
And
I start Tails from USB drive "__internal" with network unplugged
39.467
And
I enable persistence
6.733
And
I configure APT to prefer an old version of cowsay
0.011
And
I log in to a new session
11.030
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.248
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.049
And
the network is plugged
0.018
Then
the Additional Software upgrade service has started
0.047
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.061