And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:14.075
And
I configure APT to prefer an old version of cowsay
0.011
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.262
And
I accept adding "cowsay" to Additional Software
3.771
And
Additional Software is correctly configured for package "cowsay"
0.588
And
I shutdown Tails and wait for the computer to power off
4.278
And
I start Tails from USB drive "__internal" with network unplugged
34.659
And
I enable persistence
6.183
And
I configure APT to prefer an old version of cowsay
0.009
And
I disable the tails-virt-notify-user.service user unit
0.062
And
I log in to a new session
9.561
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.191
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.061
And
I prepare the Additional Software upgrade process to fail
0.039
And
the network is plugged
0.016
And
available upgrades have been checked
0.049
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.521
And
I can open the Additional Software configuration window from the notification
2.539
And
I shutdown Tails and wait for the computer to power off
17.074
And
I start Tails from USB drive "__internal" with network unplugged
35.864
And
I enable persistence
5.330
And
I configure APT to prefer an old version of cowsay
0.011
And
I log in to a new session
10.060
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.154
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.037
And
the network is plugged
0.017
Then
the Additional Software upgrade service has started
0.048
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.060