And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:23.664
And
I configure APT to prefer an old version of cowsay
0.025
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.651
And
I accept adding "cowsay" to Additional Software
4.852
And
Additional Software is correctly configured for package "cowsay"
0.700
And
I shutdown Tails and wait for the computer to power off
4.285
And
I start Tails from USB drive "__internal" with network unplugged
38.689
And
I enable persistence
7.294
And
I configure APT to prefer an old version of cowsay
0.016
And
I disable the tails-virt-notify-user.service user unit
0.064
And
I log in to a new session
10.041
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.238
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.040
And
I prepare the Additional Software upgrade process to fail
0.059
And
the network is plugged
0.019
And
available upgrades have been checked
2.239
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.092
And
I can open the Additional Software configuration window from the notification
2.652
And
I shutdown Tails and wait for the computer to power off
23.328
And
I start Tails from USB drive "__internal" with network unplugged
40.241
And
I enable persistence
6.471
And
I configure APT to prefer an old version of cowsay
0.011
And
I log in to a new session
11.626
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.185
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.036
And
the network is plugged
0.017
Then
the Additional Software upgrade service has started
0.051
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.062