And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:20.850
And
I configure APT to prefer an old version of cowsay
0.015
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.080
And
I accept adding "cowsay" to Additional Software
5.010
And
Additional Software is correctly configured for package "cowsay"
0.700
And
I shutdown Tails and wait for the computer to power off
8.308
And
I start Tails from USB drive "__internal" with network unplugged
39.637
And
I enable persistence
7.334
And
I configure APT to prefer an old version of cowsay
0.012
And
I disable the tails-virt-notify-user.service user unit
0.098
And
I log in to a new session
10.513
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.238
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.057
And
I prepare the Additional Software upgrade process to fail
0.050
And
the network is plugged
0.016
And
available upgrades have been checked
1.096
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.547
And
I can open the Additional Software configuration window from the notification
2.614
And
I shutdown Tails and wait for the computer to power off
17.624
And
I start Tails from USB drive "__internal" with network unplugged
38.900
And
I enable persistence
6.612
And
I configure APT to prefer an old version of cowsay
0.012
And
I log in to a new session
11.464
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.566
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.055
And
the network is plugged
0.020
Then
the Additional Software upgrade service has started
0.062
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.070