And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:23.874
And
I configure APT to prefer an old version of cowsay
0.014
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.905
And
I accept adding "cowsay" to Additional Software
5.027
And
Additional Software is correctly configured for package "cowsay"
0.740
And
I shutdown Tails and wait for the computer to power off
8.155
And
I start Tails from USB drive "__internal" with network unplugged
39.451
And
I enable persistence
8.910
And
I configure APT to prefer an old version of cowsay
0.010
And
I disable the tails-virt-notify-user.service user unit
0.065
And
I log in to a new session
9.781
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.264
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.043
And
I prepare the Additional Software upgrade process to fail
0.064
And
the network is plugged
0.021
And
available upgrades have been checked
2.234
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.033
And
I can open the Additional Software configuration window from the notification
2.694
And
I shutdown Tails and wait for the computer to power off
18.202
And
I start Tails from USB drive "__internal" with network unplugged
40.920
And
I enable persistence
6.989
And
I configure APT to prefer an old version of cowsay
0.014
And
I log in to a new session
13.162
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.237
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.047
And
the network is plugged
0.017
Then
the Additional Software upgrade service has started
0.057
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.064