And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:18.633
And
I configure APT to prefer an old version of cowsay
0.012
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.427
And
I accept adding "cowsay" to Additional Software
4.958
And
Additional Software is correctly configured for package "cowsay"
0.762
And
I shutdown Tails and wait for the computer to power off
8.380
And
I start Tails from USB drive "__internal" with network unplugged
37.843
And
I enable persistence
5.446
And
I configure APT to prefer an old version of cowsay
0.010
And
I disable the tails-virt-notify-user.service user unit
0.053
And
I log in to a new session
10.658
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.234
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.051
And
I prepare the Additional Software upgrade process to fail
0.046
And
the network is plugged
0.015
And
available upgrades have been checked
1.088
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.490
And
I can open the Additional Software configuration window from the notification
2.531
And
I shutdown Tails and wait for the computer to power off
23.014
And
I start Tails from USB drive "__internal" with network unplugged
37.595
And
I enable persistence
6.222
And
I configure APT to prefer an old version of cowsay
0.010
And
I log in to a new session
10.559
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.196
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.046
And
the network is plugged
0.016
Then
the Additional Software upgrade service has started
0.060
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.059