And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:18.410
And
I configure APT to prefer an old version of cowsay
0.011
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.400
And
I accept adding "cowsay" to Additional Software
5.032
And
Additional Software is correctly configured for package "cowsay"
0.672
And
I shutdown Tails and wait for the computer to power off
4.157
And
I start Tails from USB drive "__internal" with network unplugged
37.596
And
I enable persistence
5.330
And
I configure APT to prefer an old version of cowsay
0.011
And
I disable the tails-virt-notify-user.service user unit
0.051
And
I log in to a new session
9.926
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.203
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.039
And
I prepare the Additional Software upgrade process to fail
0.034
And
the network is plugged
0.016
And
available upgrades have been checked
2.159
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.488
And
I can open the Additional Software configuration window from the notification
2.575
And
I shutdown Tails and wait for the computer to power off
17.653
And
I start Tails from USB drive "__internal" with network unplugged
37.450
And
I enable persistence
6.267
And
I configure APT to prefer an old version of cowsay
0.013
And
I log in to a new session
10.554
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.227
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.038
And
the network is plugged
0.020
Then
the Additional Software upgrade service has started
0.050
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.053