And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:15.863
And
I configure APT to prefer an old version of cowsay
0.013
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.658
And
I accept adding "cowsay" to Additional Software
3.690
And
Additional Software is correctly configured for package "cowsay"
0.622
And
I shutdown Tails and wait for the computer to power off
7.886
And
I start Tails from USB drive "__internal" with network unplugged
37.026
And
I enable persistence
6.723
And
I configure APT to prefer an old version of cowsay
0.013
And
I disable the tails-virt-notify-user.service user unit
0.061
And
I log in to a new session
10.169
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.176
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.044
And
I prepare the Additional Software upgrade process to fail
0.046
And
the network is plugged
0.013
And
available upgrades have been checked
1.097
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.965
And
I can open the Additional Software configuration window from the notification
2.588
And
I shutdown Tails and wait for the computer to power off
17.166
And
I start Tails from USB drive "__internal" with network unplugged
37.405
And
I enable persistence
5.595
And
I configure APT to prefer an old version of cowsay
0.012
And
I log in to a new session
10.698
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.195
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.044
And
the network is plugged
0.019
Then
the Additional Software upgrade service has started
0.058
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.065