And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:13.143
And
I configure APT to prefer an old version of cowsay
0.034
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.413
And
I accept adding "cowsay" to Additional Software
3.610
And
Additional Software is correctly configured for package "cowsay"
0.571
And
I shutdown Tails and wait for the computer to power off
3.970
And
I start Tails from USB drive "__internal" with network unplugged
35.961
And
I enable persistence
5.660
And
I configure APT to prefer an old version of cowsay
0.009
And
I disable the tails-virt-notify-user.service user unit
0.062
And
I log in to a new session
9.238
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.246
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.074
And
I prepare the Additional Software upgrade process to fail
0.078
And
the network is plugged
0.015
And
available upgrades have been checked
1.081
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.987
And
I can open the Additional Software configuration window from the notification
2.481
And
I shutdown Tails and wait for the computer to power off
22.172
And
I start Tails from USB drive "__internal" with network unplugged
35.671
And
I enable persistence
5.604
And
I configure APT to prefer an old version of cowsay
0.010
And
I log in to a new session
8.693
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.189
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.042
And
the network is plugged
0.016
Then
the Additional Software upgrade service has started
0.042
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.050