And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:14.899
And
I configure APT to prefer an old version of cowsay
0.014
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.781
And
I accept adding "cowsay" to Additional Software
3.710
And
Additional Software is correctly configured for package "cowsay"
0.565
And
I shutdown Tails and wait for the computer to power off
7.831
And
I start Tails from USB drive "__internal" with network unplugged
36.053
And
I enable persistence
5.685
And
I configure APT to prefer an old version of cowsay
0.010
And
I disable the tails-virt-notify-user.service user unit
0.106
And
I log in to a new session
8.876
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.184
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.053
And
I prepare the Additional Software upgrade process to fail
0.049
And
the network is plugged
0.039
And
available upgrades have been checked
2.161
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.460
And
I can open the Additional Software configuration window from the notification
2.489
And
I shutdown Tails and wait for the computer to power off
18.388
And
I start Tails from USB drive "__internal" with network unplugged
34.977
And
I enable persistence
5.295
And
I configure APT to prefer an old version of cowsay
0.010
And
I log in to a new session
10.652
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.170
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.055
And
the network is plugged
0.017
Then
the Additional Software upgrade service has started
0.055
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.065