And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:14.686
And
I configure APT to prefer an old version of cowsay
0.015
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.457
And
I accept adding "cowsay" to Additional Software
3.737
And
Additional Software is correctly configured for package "cowsay"
0.600
And
I shutdown Tails and wait for the computer to power off
7.861
And
I start Tails from USB drive "__internal" with network unplugged
35.442
And
I enable persistence
5.240
And
I configure APT to prefer an old version of cowsay
0.011
And
I disable the tails-virt-notify-user.service user unit
0.049
And
I log in to a new session
9.266
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.202
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.036
And
I prepare the Additional Software upgrade process to fail
0.048
And
the network is plugged
0.043
And
available upgrades have been checked
1.107
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.609
And
I can open the Additional Software configuration window from the notification
2.559
And
I shutdown Tails and wait for the computer to power off
17.334
And
I start Tails from USB drive "__internal" with network unplugged
36.039
And
I enable persistence
6.301
And
I configure APT to prefer an old version of cowsay
0.010
And
I log in to a new session
9.653
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.258
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.045
And
the network is plugged
0.018
Then
the Additional Software upgrade service has started
0.054
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.058