And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:12.592
And
I configure APT to prefer an old version of cowsay
0.009
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.415
And
I accept adding "cowsay" to Additional Software
3.624
And
Additional Software is correctly configured for package "cowsay"
0.700
And
I shutdown Tails and wait for the computer to power off
7.898
And
I start Tails from USB drive "__internal" with network unplugged
35.438
And
I enable persistence
6.552
And
I configure APT to prefer an old version of cowsay
0.011
And
I disable the tails-virt-notify-user.service user unit
0.084
And
I log in to a new session
9.596
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.181
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.041
And
I prepare the Additional Software upgrade process to fail
0.039
And
the network is plugged
0.017
And
available upgrades have been checked
2.140
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.951
And
I can open the Additional Software configuration window from the notification
2.490
And
I shutdown Tails and wait for the computer to power off
18.455
And
I start Tails from USB drive "__internal" with network unplugged
36.024
And
I enable persistence
6.566
And
I configure APT to prefer an old version of cowsay
0.010
And
I log in to a new session
9.653
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.179
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.032
And
the network is plugged
0.019
Then
the Additional Software upgrade service has started
0.048
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.062