And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:17.014
And
I configure APT to prefer an old version of cowsay
0.011
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.161
And
I accept adding "cowsay" to Additional Software
4.945
And
Additional Software is correctly configured for package "cowsay"
0.595
And
I shutdown Tails and wait for the computer to power off
8.090
And
I start Tails from USB drive "__internal" with network unplugged
37.566
And
I enable persistence
6.647
And
I configure APT to prefer an old version of cowsay
0.010
And
I disable the tails-virt-notify-user.service user unit
0.066
And
I log in to a new session
9.616
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.239
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.076
And
I prepare the Additional Software upgrade process to fail
0.051
And
the network is plugged
0.019
And
available upgrades have been checked
2.200
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.763
And
I can open the Additional Software configuration window from the notification
2.685
And
I shutdown Tails and wait for the computer to power off
18.662
And
I start Tails from USB drive "__internal" with network unplugged
37.200
And
I enable persistence
6.997
And
I configure APT to prefer an old version of cowsay
0.009
And
I log in to a new session
10.093
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.230
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.060
And
the network is plugged
0.014
Then
the Additional Software upgrade service has started
0.058
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.088