And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:18.558
And
I configure APT to prefer an old version of cowsay
0.013
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.486
And
I accept adding "cowsay" to Additional Software
3.632
And
Additional Software is correctly configured for package "cowsay"
0.747
And
I shutdown Tails and wait for the computer to power off
4.085
And
I start Tails from USB drive "__internal" with network unplugged
38.114
And
I enable persistence
6.805
And
I configure APT to prefer an old version of cowsay
0.013
And
I disable the tails-virt-notify-user.service user unit
0.057
And
I log in to a new session
10.697
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.170
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.046
And
I prepare the Additional Software upgrade process to fail
0.037
And
the network is plugged
0.016
And
available upgrades have been checked
2.181
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.030
And
I can open the Additional Software configuration window from the notification
2.732
And
I shutdown Tails and wait for the computer to power off
22.598
And
I start Tails from USB drive "__internal" with network unplugged
37.457
And
I enable persistence
6.627
And
I configure APT to prefer an old version of cowsay
0.011
And
I log in to a new session
12.733
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.199
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.047
And
the network is plugged
0.061
Then
the Additional Software upgrade service has started
0.048
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.056