And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:18.289
And
I configure APT to prefer an old version of cowsay
0.013
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.805
And
I accept adding "cowsay" to Additional Software
4.809
And
Additional Software is correctly configured for package "cowsay"
0.694
And
I shutdown Tails and wait for the computer to power off
7.972
And
I start Tails from USB drive "__internal" with network unplugged
37.558
And
I enable persistence
5.543
And
I configure APT to prefer an old version of cowsay
0.010
And
I disable the tails-virt-notify-user.service user unit
0.053
And
I log in to a new session
9.873
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.252
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.043
And
I prepare the Additional Software upgrade process to fail
0.038
And
the network is plugged
0.013
And
available upgrades have been checked
1.085
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.485
And
I can open the Additional Software configuration window from the notification
2.601
And
I shutdown Tails and wait for the computer to power off
17.309
And
I start Tails from USB drive "__internal" with network unplugged
37.520
And
I enable persistence
5.592
And
I configure APT to prefer an old version of cowsay
0.011
And
I log in to a new session
9.553
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.200
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.041
And
the network is plugged
0.032
Then
the Additional Software upgrade service has started
0.053
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.076