And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:12.411
And
I configure APT to prefer an old version of cowsay
0.012
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.664
And
I accept adding "cowsay" to Additional Software
3.831
And
Additional Software is correctly configured for package "cowsay"
0.603
And
I shutdown Tails and wait for the computer to power off
2.734
And
I start Tails from USB drive "__internal" with network unplugged
36.709
And
I enable persistence
5.671
And
I configure APT to prefer an old version of cowsay
0.017
And
I disable the tails-virt-notify-user.service user unit
0.061
And
I log in to a new session
8.982
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.512
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.038
And
I prepare the Additional Software upgrade process to fail
0.035
And
the network is plugged
0.016
And
available upgrades have been checked
2.152
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.035
And
I can open the Additional Software configuration window from the notification
2.630
And
I shutdown Tails and wait for the computer to power off
7.953
And
I start Tails from USB drive "__internal" with network unplugged
34.652
And
I enable persistence
6.280
And
I configure APT to prefer an old version of cowsay
0.012
And
I log in to a new session
9.594
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
11.211
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.034
And
the network is plugged
0.018
Then
the Additional Software upgrade service has started
0.071
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.069