And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:18.058
And
I configure APT to prefer an old version of cowsay
0.013
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.367
And
I accept adding "cowsay" to Additional Software
4.081
And
Additional Software is correctly configured for package "cowsay"
0.630
And
I shutdown Tails and wait for the computer to power off
7.975
And
I start Tails from USB drive "__internal" with network unplugged
38.330
And
I enable persistence
5.785
And
I configure APT to prefer an old version of cowsay
0.013
And
I disable the tails-virt-notify-user.service user unit
0.055
And
I log in to a new session
10.207
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.186
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.044
And
I prepare the Additional Software upgrade process to fail
0.050
And
the network is plugged
0.023
And
available upgrades have been checked
1.095
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.503
And
I can open the Additional Software configuration window from the notification
2.518
And
I shutdown Tails and wait for the computer to power off
17.556
And
I start Tails from USB drive "__internal" with network unplugged
38.074
And
I enable persistence
5.700
And
I configure APT to prefer an old version of cowsay
0.011
And
I log in to a new session
11.396
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.233
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.063
And
the network is plugged
0.020
Then
the Additional Software upgrade service has started
0.054
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.053