And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:22.944
And
I configure APT to prefer an old version of cowsay
0.013
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.253
And
I accept adding "cowsay" to Additional Software
5.156
And
Additional Software is correctly configured for package "cowsay"
0.971
And
I shutdown Tails and wait for the computer to power off
8.126
And
I start Tails from USB drive "__internal" with network unplugged
39.999
And
I enable persistence
7.155
And
I configure APT to prefer an old version of cowsay
0.012
And
I disable the tails-virt-notify-user.service user unit
0.078
And
I log in to a new session
10.313
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.269
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.048
And
I prepare the Additional Software upgrade process to fail
0.079
And
the network is plugged
0.020
And
available upgrades have been checked
2.180
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.577
And
I can open the Additional Software configuration window from the notification
2.592
And
I shutdown Tails and wait for the computer to power off
13.804
And
I start Tails from USB drive "__internal" with network unplugged
39.689
And
I enable persistence
7.132
And
I configure APT to prefer an old version of cowsay
0.014
And
I log in to a new session
11.269
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.677
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.035
And
the network is plugged
0.041
Then
the Additional Software upgrade service has started
0.070
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.073