And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:20.829
And
I configure APT to prefer an old version of cowsay
0.011
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.011
And
I accept adding "cowsay" to Additional Software
5.177
And
Additional Software is correctly configured for package "cowsay"
0.634
And
I shutdown Tails and wait for the computer to power off
8.122
And
I start Tails from USB drive "__internal" with network unplugged
38.923
And
I enable persistence
7.075
And
I configure APT to prefer an old version of cowsay
0.011
And
I disable the tails-virt-notify-user.service user unit
0.062
And
I log in to a new session
9.852
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.210
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.047
And
I prepare the Additional Software upgrade process to fail
0.049
And
the network is plugged
0.022
And
available upgrades have been checked
1.104
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.059
And
I can open the Additional Software configuration window from the notification
2.636
And
I shutdown Tails and wait for the computer to power off
17.578
And
I start Tails from USB drive "__internal" with network unplugged
38.804
And
I enable persistence
7.239
And
I configure APT to prefer an old version of cowsay
0.014
And
I log in to a new session
10.234
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.210
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.054
And
the network is plugged
0.029
Then
the Additional Software upgrade service has started
0.097
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.077