And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:17.629
And
I configure APT to prefer an old version of cowsay
0.013
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.924
And
I accept adding "cowsay" to Additional Software
5.007
And
Additional Software is correctly configured for package "cowsay"
0.708
And
I shutdown Tails and wait for the computer to power off
7.936
And
I start Tails from USB drive "__internal" with network unplugged
37.854
And
I enable persistence
5.650
And
I configure APT to prefer an old version of cowsay
0.013
And
I disable the tails-virt-notify-user.service user unit
0.063
And
I log in to a new session
9.925
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.218
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.046
And
I prepare the Additional Software upgrade process to fail
0.038
And
the network is plugged
0.019
And
available upgrades have been checked
2.164
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.479
And
I can open the Additional Software configuration window from the notification
2.520
And
I shutdown Tails and wait for the computer to power off
17.237
And
I start Tails from USB drive "__internal" with network unplugged
37.103
And
I enable persistence
5.892
And
I configure APT to prefer an old version of cowsay
0.016
And
I log in to a new session
12.119
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.233
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.058
And
the network is plugged
0.017
Then
the Additional Software upgrade service has started
0.051
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.061