And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:19.504
And
I configure APT to prefer an old version of cowsay
0.014
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.397
And
I accept adding "cowsay" to Additional Software
3.665
And
Additional Software is correctly configured for package "cowsay"
0.655
And
I shutdown Tails and wait for the computer to power off
8.148
And
I start Tails from USB drive "__internal" with network unplugged
38.453
And
I enable persistence
7.007
And
I configure APT to prefer an old version of cowsay
0.013
And
I disable the tails-virt-notify-user.service user unit
0.055
And
I log in to a new session
10.447
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.228
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.043
And
I prepare the Additional Software upgrade process to fail
0.061
And
the network is plugged
0.014
And
available upgrades have been checked
2.181
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.554
And
I can open the Additional Software configuration window from the notification
2.578
And
I shutdown Tails and wait for the computer to power off
23.291
And
I start Tails from USB drive "__internal" with network unplugged
38.520
And
I enable persistence
6.818
And
I configure APT to prefer an old version of cowsay
0.012
And
I log in to a new session
10.972
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.279
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.049
And
the network is plugged
0.019
Then
the Additional Software upgrade service has started
0.055
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.065